journal: The Journal of Natural Gas Engineering

Ceased

Open Access Published from February 27, 2019 to December 1, 2018

The Journal of Natural Gas Engineering

ISSN: 2379-2892

About this journal

Journal of Natural Gas Engineering (JNGE), is a fully peer-reviewed, open access, electronic journal publishing original research covering the newest and most innovative engineering, scientific, and technological advances in natural gas engineering. Our aim is to publish your work as efficiently and effectively as possible so the world is aware of it. Our standard policy requires each paper to be reviewed by at least two referees and the peer-review process is single-blind.

The Journal of Natural Gas Engineering is publishing original research on the engineering, scientific, and technological advances covering all aspects of natural gas engineering: production, transportation, and processing. In addition, JNGE will include auxiliary subjects such as thermodynamics, physical properties, phase equilibrium, etc. related to the natural gas industry. The intention is to include modelling and theoretical studies, experimental work, and field data.

Natural gas is an extremely important source of fuel and power, and its global importance is growing. Thus, JNGE seeks to include research by engineers and scientists from every country and region in the world where natural gas is relevant, and thereby contributing both practical and theoretical material to the global body of scientific literature in this area. Papers are invited on any individual topic in natural gas engineering or on those which are interdisciplinary.

Abstracting and Indexing

The Journal of Natural Gas Engineering is covered by the following services:

Astrophysics Data System (ADS)
Baidu Scholar
Chronos Hub
CNKI Scholar (China National Knowledge Infrastructure)
CNPIEC - cnpLINKer
Dimensions
EBSCO Discovery Service
Google Scholar
J-Gate
Naver Academic
Naviga (Softweco)
Primo Central (ExLibris)
ReadCube
ScienceON (Korea Institute of Science and Technology Information)
Scilit
Semantic Scholar
Summon (ProQuest)
TDNet
TEMA Technik und Management
WanFang Data
WorldCat (OCLC)
X-MOL
Yewno Discover

Supplementary Materials

Topics

External Links

Volume 3 (2018)

Volume 2 (2017)

Volume 1 (2016)

No ranking information is available for this journal.

Submit

Manuscripts should be submitted to JNGE via online submission system Editorial Manager available at https://www.editorialmanager.com/jnge/default.aspx. Authors should register themselves first as new users and then upload their manuscripts.
In case of any technical problems, please contact the Managing Editor (Jan Barabach, Jan.Barabach@degruyter.com).

Editorial

Editor-in-Chief
Anders Andreasen, Denmark

Editorial Board
Chun-Gang Xu, China
Hamid Reza Rahbari, Iran
Kashy Aminian, USA
Maciej Chaczykowski, Poland
Mahmoud Khader, Egypt
Mohd Shariq Khan, Oman
Mojgan Abbasi, Iran
Mustafa Nasser, Qatar
Ofélia de Q. F. Araújo, Brazil

Managing Editor
Jan Barabach, Jan.Barabach@degruyter.com

Volume 3 Issue 2

December 2018

Open Access March 25, 2019

Sulfur Solubilities in Toluene, o-Xylene, m-Xylene and p-Xylene at Temperatures Ranging from 303.15 K to 363.15 K

Wouter Nicolaas Wermink, Dmitri Spinu, Geert Frederik Versteeg

Page range: 71-95

More Download PDF

Abstract

The solubility of sulfur in toluene, o-xylene, m-xylene and p-xylene was investigated at temperatures ranging from 303.15 K to 363.15 K. This study was required for the design of the regeneration section of the novel Vitrisol ® desulfurization process. It was determined that, for experimental conditions studied, o-xylene exhibited the highest sulfur solubility and toluene the lowest sulfur solubility from the investigated aromatic hydrocarbons. The sulfur solubility data reported in this study were in good agreement with sulfur solubility data in toluene, m-xylene and p-xylene published in open literature. Sulfur solubility data in o-xylene was not published in open literature. The temperature dependences of the solubility of sulfur in toluene, o-xylene, m-xylene and p-xylene were determined from solubility equilibria. The enthalpies of dissolution Δ Ho of sulfur in toluene, o-xylene, m-xylene and p-xylene were determined to be 27.93 kJ/mol, 27.95 kJ/mol, 26.98 kJ/mol and 27.70 kJ/mol respectively.

Open Access March 25, 2019

Vapour-Liquid Equilibria of Ethane and Ethanethiol: Experiments and Modelling

Waheed Afzal, Alain Valtz, Christophe Coquelet

Page range: 96-108

More Download PDF

Abstract

This work reports high-quality isothermal vapor–liquid equilibrium data for ethane + ethanethiol (or ethyl mercaptan) at 303 K, 323 K and 343 K and pressures up to 6.25 MPa. A sapphire-tube equilibrium cell with an online micro sampler and GC-TCD are employed to measure equilibrium phase concentrations at specific temperatures and pressures. Peng Robinson equation of state with classical alpha function is found adequate for data treatment and thermodynamic modelling.

Open Access March 25, 2019

Solubility of Benzene in Aqueous Solutions of Monoethanolamine

Fang-Yuan Jou, Alan E. Mather

Page range: 109-113

More Download PDF

Abstract

The solubility of benzene in aqueous solutions of monoethanolamine has been measured at temperatures ranging from 25 °C to 100 °C.

Open Access March 25, 2019

Mathematical Modeling of Fluid Flow to Radially Fractured Wells in Unconventional Reservoirs

Gao Li, Boyun Guo, Xiaohui Zhang

Page range: 114-132

More Download PDF

Abstract

Radial fractures are created in unconventional gas and oil reservoirs in modern well stimulation operations such as Hydraulic Re-Fracturing (HRF), Explosive Fracturing (EF) and High Energy Gas Fracturing (HEGF). This paper presents a mathematical model to describe fluid flow from reservoir through radial fractures to wellbore. The model can be applied to analyzing angles between radial fractures. Field case studies were carried out with the model using pressure transient data from three typical HRF wells in a lower-permeability reservoir. The studies show a good correlation between observed well performance and model-interpreted fracture angle. The well with the highest productivity improvement by the HRF corresponds to the interpreted perpendicular fractures, while the well with the lowest productivity improvement corresponds to the interpreted conditions where the second fracture is much shorter than the first one or where there created two merged/parallel fractures. Result of the case studies of a tight sand reservoir supports the analytical model.

(Deutsch)

View latest issue

Type: Journal
Language: English
Publisher: De Gruyter Open Access
First published: February 27, 2019
Last published: December 1, 2018
Publication Frequency: 2 Issues per Year